D-Link DES-3226 Reference Manual - Page 84
ping <ipaddr> {times <value>} {timeout, <sec>}
UPC - 790069240560
View all D-Link DES-3226 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
DES-3226S Layer 2 Fast Ethernet Switch User's Guide ping Purpose Syntax Description Parameters Restrictions Used to test the connectivity between network devices. ping {times } {timeout } This command sends Internet Control Message Protocol (ICMP) echo messages to a remote IP address. The remote IP address will then "echo" or return the message. This is used to confirm connectivity between the switch and the remote device. − the IP address of the remote device. times − the number of individual ICMP echo messages to be sent. A value of 0 will send an infinite ICMP echo messages. The maximum value is 255. The default is 0 timeout − defines the time-out period while waiting for a response from the remote device. A value of 1 to 99 seconds can be specified. The default is 1 second. Only administrator-level users can issue this command. Example Usage: To send ICMP echo message to "10.48.74.121" for 4 times: 84 Network Management Commands