D-Link DES-3226 Reference Manual - Page 66
create snmp trap_receiver
UPC - 790069240560
View all D-Link DES-3226 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
DES-3226S Layer 2 Fast Ethernet Switch User's Guide create snmp trap_receiver Purpose Used to specify a management station, by IP address and community string, that will receive traps generated by the switch's SNMP agent. Syntax create snmp trap_receiver Description This command is used to specify the IP address of a management station that will receive traps generated by the switch's SNMP agent and the community string that will be used to authenticate the management station's privileges. Parameters − the IP address of a management station that will receive SNMP traps generated by the switch's SNMP agent. − An alpha-numeric string of up to 32 characters that will be used to authenticate management stations that want to receive SNMP traps from the swtich's SNMP agent. Restrictions Only administrator-level users can issue this command. A maximum of 3 trap receivers can be specified. Example Usage: To create a trap receiver 10.1.1.1 in read-only level SNMP community. 66 Network Management Commands