D-Link DES-3226 Reference Manual - Page 41

DES-3226S Layer 2 Fast Ethernet Switch User's Guide config serial_port Purpose Used to configure the serial port. Syntax config serial_port {baud_rate[9600/19200/38400/115200]/auto_logo ut [never/2_minutes/5_minutes/10_minutes/ 15_minutes]} Description This command is used to configure the serial port's baud rate and auto logout settings. Parameters [9600/19200/38400/115200] − The serial bit rate that will be used to communicate with the management host. never − no time limit on the length of time the console can be open with no user input. 2_minutes − the console will log out the current user if there is no user input for 2 minutes. 5_minutes − the console will log out the current user if there is no user input for 5 minutes. 10_minutes − the console will log out the current user if there is no user input for 10 minutes. 15_minutes − the console will log out the current user if there is no user input for 15 minutes. Restriction Only administrator-level users can issue this s command. Example Usage: Basic Switch Commands 41