D-Link DES-3226 Reference Manual - Page 57
Switch Port Commands
UPC - 790069240560
View all D-Link DES-3226 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
DES-3226S Layer 2 Fast Ethernet Switch User's Guide config ports number is always 1. So, 1:3-1:4 would specify ports 3 and 4 on the switch. auto − enables auto-negotiation for the specified range of ports. [10/100/1000] − configures the speed in Mbps for the specified range of ports. Gigabit ports are statically set to 1000 and cannot be set to slower speeds. [half/full] − configures the specified range of ports as either full- or half-duplex. flowcontrol [enabled/disabled] − enables or disables flow control for the specified range of ports. learning [enabled/disabled] − enables or disables the MAC address learning on the specified range of ports. state [enabled/disabled] − enables or disables the specified range of ports. Restrictions Only administrator-level users can issue this command. Example Usage: To configure the speed of the port 1-3 of switch 1 to be 10 Mbps, full-duplex, learning and state enabled: DES3226S:4#config ports 1:1-1:3 speed 10_full learning on state enabled Command: config ports 1:1-1:3 speed 10_full learning on Switch Port Commands 57