D-Link DES-3226 Reference Manual - Page 18
Using the Console CLI
UPC - 790069240560
View all D-Link DES-3226 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
DES-3226S Layer 2 Fast Ethernet Switch User's Guide with the Windows operating system) using an RS-232C serial cable. Your terminal parameters will need to be set to: • VT-100/ANSI compatible • 9,600 baud • 8 data bits • No parity • One stop bit • No flow control You can also access the same functions over a TELNET interface. Once you have set an IP address for your Switch, you can use a TELNET program (in VT-100 compatible terminal mode) to access and control the Switch. All of the screens are identical, whether accessed from the console port or from a TELNET interface. After the switch reboots and you have loged in, the console looks like this: 18 Using the Console CLI
DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
18
Using the Console CLI
with the Windows operating system) using an RS-232C serial cable.
Your terminal parameters will need to be set to
:
•
VT-100/ANSI compatible
•
9,600 baud
•
8 data bits
•
No parity
•
One stop bit
•
No flow control
You can also access the same functions over a
TELNET
interface.
Once you have set an IP address for your Switch, you can use a
TELNET
program (in VT-100 compatible terminal mode) to access
and control the Switch. All of the screens are identical, whether
accessed from the console port or from a
TELNET
interface.
After the switch reboots and you have loged in, the console looks
like this: