D-Link DES-3226 Reference Manual - Page 89
Download/Upload Commands
UPC - 790069240560
View all D-Link DES-3226 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
DES-3226S Layer 2 Fast Ethernet Switch User's Guide download Purpose Syntax Description Parameters Used to download and install new firmware or a switch configuration file from a TFTP server. download [ firmware {unit [all/]}/configuration {increment}] This command is used to download a new firmware or a switch configuration file from a TFTP server. firmware − download and install new firmware on the switch from a TFTP server. configuration − download a switch configuration file from a TFTP server. − the IP address of the TFTP server. − the DOS path and filename of the firmware or switch configuration file on the TFTP server. For example, C:\3326s.had. unit [all/] − all specifies all units (switches), is the unit id of the switch that will receive the download. increment − allows the download of a partial switch configuration file. This allows a file to be downloaded that will change only the switch parameters explicitly stated in the configuration file. All other switch Download/Upload Commands 89