Dell 2155cn User Manual - Page 434

Resend Delay Redial Attempts Redial Delay Junk Fax Setup Remote Receive Remote Rcv Tone Fax Header Fax Header Name Fax Number Fax Cover Page DRPD Pattern Duplex Print*1 Sent Fax Fwd Fax Fwd Number Prefix Dial Prefix Dial Num Discard Size ECM Modem Speed Displays the interval between transmission attempts. Displays the number of redial attempts. Displays the redial interval. Displays whether to reject faxes sent from unwanted stations. Displays whether to receive faxes by pressing a remote receive code on the external telephone. Displays the tone to start Remote Receive. Displays whether to print the information of the sender on the header of faxes. Displays the name of the sender that will be printed on the header of faxes. Displays the fax number of the printer, which will be printed on the header of faxes. Displays whether to attach a cover page to faxes. Displays the Distinctive Ring Pattern Detection (DRPD) setting. Displays whether to print the received fax on both sides of a sheet of paper. Displays whether to forward incoming faxes to a specified destination. Displays the fax number of the destination to which incoming faxes are to be forwarded. Displays whether to set a prefix dial number. Displays a prefix dial number. This number dials before any auto dial number is started. It is useful for accessing the Private Automatic Branch Exchange (PABX). Displays whether to delete text or images at the bottom of a fax page when the entire page does not fit onto the output paper. Displays whether the Error Correction Mode (ECM) is enabled. Displays the fax modem speed when a fax transmission or reception error occurs. 432 Understanding the Tool Box Menus