Dell 2155cn User Manual - Page 492

Yes Initializes the wired network data stored in NVM. No* Does not initialize the wired network data stored in NVM. Fax Settings Use the Fax Settings menu to configure the basic fax settings. NOTE: Values marked by an asterisk (*) are the factory default menu settings. Receive Mode Purpose: To select the default fax receiving mode. Values: Telephone Fax* Telephone/Fax Ans Machine/Fax DRPD Automatic fax reception is turned off. You can receive a fax by picking up the handset of the external phone and then pressing the remote receive code, or by setting OnHook to On (you can hear voice or fax tones from the remote machine) and then pressing . Automatically receives faxes. When the printer receives an incoming fax, the external telephone rings for the time specified in Auto Rec Tel/Fax, and then the printer automatically receives a fax. If an incoming call is not a fax, the printer beeps from the internal speaker indicating that the call is a telephone call. The printer can share a telephone line with an answering machine. In this mode, the printer will monitor the fax signal and pick up the line if there are fax tones. If the phone communication in your country is serial, this mode is not supported. Before using the Distinctive Ring Pattern Detection (DRPD) option, a distinctive ring service must be installed on your telephone line by the telephone company. After the telephone company has provided a separate number for faxing with a distinctive ring pattern, configure the fax setup to monitor for that specific ring pattern. Auto Rec Fax Purpose: 490 Understanding the Printer Menus