Dell Dimension 5150 Owner's Manual - Page 68
Memory, DDR2 Memory Overview - memory type
View all Dell Dimension 5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Memory You can increase your computer memory by installing memory modules on the system board. Your computer supports DDR2 memory. For additional information on the type of memory supported by your computer, see "Memory" on page 103. DDR2 Memory Overview DDR2 memory modules should be installed in pairs of matched memory size, speed, and technology. If the DDR2 memory modules are not installed in matched pairs, the computer will continue to operate, but with a slight reduction in performance. See the label on the module to determine the module's capacity. NOTE: Always install DDR2 memory modules in the order indicated on the system board. The recommended memory configurations are: - A pair of matched memory modules installed in DIMM connectors 1 and 2 or - A pair of matched memory modules installed in DIMM connectors 1 and 2 and another matched pair installed in DIMM connectors 3 and 4 NOTICE: Do not install ECC or buffered memory modules. Only unbuffered, non-ECC memory is supported. • If you install mixed pairs of DDR2 400-MHz (PC2-3200) and DDR2 533-MHz (PC2-4300) memory, the modules function at the slowest speed installed. • Be sure to install a single memory module in DIMM connector 1, the connector closest to the processor, before you install modules in the other connectors. 68 Removing and Installing Parts