Dell Dimension 5150 Owner's Manual - Page 95
Installing a Media Card Reader
View all Dell Dimension 5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Installing a Media Card Reader CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis. 1 Follow the procedures in "Before You Begin" on page 59. Media Card Reader screws (4) 2 Lay the computer on its side so that the system board is on the bottom of the inside of the computer. 3 Remove the computer cover (see "Removing the Computer Cover" on page 65). 4 Remove the drive panel (see "Removing the Drive Panel" on page 80). 5 Remove the Media Card Reader and bracket from its packaging and ensure that all of the screws are included. 6 Gently slide the drive into place until you feel a click or feel the drive securely installed. Ensure that the Media Card Reader is installed before the FlexBay cable is connected. 7 Connect the FlexBay USB cable to the back of the Media Card Reader and to the Media Card Reader connector on the system board (see "System Board Components" on page 67). Removing and Installing Parts 95