Dell Force10 S25-01-GE-24T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 1012

www.dell.com | support.dell.com Syntax clear ip ospf process-id statistics [interface name {neighbor router-id}] Parameters process-id interface name neighbor router-id Enter the OSPF Process ID to clear statistics for a specific process. If no Process ID is entered, all OSPF processes are cleared. (OPTIONAL) Enter the keyword interface followed by one of the following interface keywords and slot/port or number information: For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: C-Series and S-Series Range: 1-128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. For a SONET interface, enter the keyword sonet followed by the slot/port information. For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. (OPTIONAL) Enter the keyword neighbor followed by the neighbor's router-id in dotted decimal format (A.B.C.D.). Defaults No defaults values or behavior Command Modes EXEC Privilege Command History Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 Introduced support for Multi-Process OSPF. Introduced on S-Series Introduced on C-Series Introduced on E-Series Related Commands show ip ospf statistics Display the OSPF statistics debug ip ospf c e s Display debug information on OSPF. Entering debug ip ospf enables OSPF debugging for the first OSPF process,. Syntax debug ip ospf process-id [bfd |event | packet | spf] To cancel the debug command, enter no debug ip ospf. Parameters process-id bfd event packet spf Enter the OSPF Process ID to debug a specific process. If no Process ID is entered, command applies only to the first OSPF process. (OPTIONAL) Enter the keyword bfd to debug only OSPF BFD information. (OPTIONAL) Enter the keyword event to debug only OSPF event information. (OPTIONAL) Enter the keyword packet to debug only OSPF packet information. (OPTIONAL) Enter the keyword spf to display the Shortest Path First information. 1012 | Open Shortest Path First (OSPFv2 and OSPFv3)