Dell Force10 S25-01-GE-24T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 1106
ip pim rp-candidate
View all Dell Force10 S25-01-GE-24T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1106 highlights
www.dell.com | support.dell.com ip pim rp-candidate c e s Configure a PIM router to send out a Candidate-RP-Advertisement message to the Bootstrap (BS) router or define group prefixes that are defined with the RP address to PIM BSR. Syntax ip pim rp-candidate {interface [priority] To return to the default value, enter no ip pim rp-candidate {interface [priority] command. Parameters interface priority Enter the following keywords and slot/port or number information: • For a Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Loopback interface, enter the keyword loopback followed by a number from 0 to 16383. • For a Port Channel interface, enter the keyword port-channel followed by a number: C-Series and S-Series Range: 1-128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a SONET interface, enter the keyword sonet followed by the slot/ port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. (OPTIONAL) Enter the priority used in Bootstrap election process. Range: zero (0) to 255 Default: 192 Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.1.1.0 Version 7.8.1.0 pre-Version 6.1.1.1 Introduced on E-Series ExaScale Introduced on S-Series Introduced on E-Series Usage Priority is stored at BSR router when receiving a Candidate-RP-Advertisement. Information 1106 | PIM-Sparse Mode (PIM-SM)