Dell Force10 S25-01-GE-24T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 823

Command Modes ROUTER ISIS Usage Use caution when you enter this command. Back up your configuration prior to using this command or Information your IS-IS configuration will be erased. Related Commands copy Use this command to save the current configuration to another location. clear isis e Restart the IS-IS process. All IS-IS data is cleared. Syntax clear isis [tag] {* | database | traffic} Parameters tag * database traffic (Optional) Enter an alphanumeric string to specify the IS-IS routing tag area. Enter the keyword * to clear all IS-IS information and restarts the IS-IS process. This command removes IS-IS neighbor information and IS-IS LSP database information and the full SPF calculation will be done. Clears IS-IS LSP database information. Clears IS-IS counters. Command Modes EXEC Privilege clns host e Define a name-to-network service mapping point (NSAP) mapping that can then be used with commands that require NSAPs and system IDs. Syntax clns host name nsap Parameters name nsap Enter an alphanumeric string to identify the name-to-NSAP mapping. Enter a specific NSAP address that will be associated with the name parameter. Defaults Not configured. Command Modes ROUTER ISIS Usage Use this command to configure a shortcut name that can used instead of entering a long string of Information numbers associated with an NSAP address. Related Commands hostname dynamic Enables dynamic learning of hostnames from routers in the domain and allows the routers to advertise the hostnames in LSPs. debug isis e Enable debugging for all IS-IS operations. Syntax debug isis Intermediate System to Intermediate System (IS-IS) | 823