Dell Force10 S25-01-GE-24T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 1058

www.dell.com | support.dell.com Table 38-12. Command Example Descriptions: show ip ospf statistics process-id global Row Heading Total Error Hello DDiscr LSReq LSUpd LSAck TxQ-Len RxQ-Len Tx-Mark Rx-Mark Hello-Q LSR-Q Other-Q Description Displays the total number of packets received/transmitted by the OSPF process Displays the error count while receiving and transmitting packets by the OSPF process Number of OSPF Hello packets Number of database description packets Number of link state request packets Number of link state update packets Number of link state acknowledgement packets The transmission queue length The reception queue length The highest number mark in the transmission queue The highest number mark in the reception queue The queue, for transmission or reception, for the hello packets The queue, for transmission or reception, for the link state request packets. The queue, for transmission or reception, for the link state acknowledgement, database description, and update packets. Table 38-13. Error Definitions: show ip ospf statistics process-id global Error Type Intf_Down Non-Dr Self-Org Wrong_Len Invld-Nbr Nbr-State Auth-Error MD5-Error Cksum-Err Version AreaMismatch Conf-Issue No-Buffer Seq-no Socket Q-overflow Unknown-Pkt Description Received packets on an interface that is either down or OSPF is not enabled. Received packets with a destination address of ALL_DRS even though SELF is not a designated router Receive the self originated packet The received packet length is different to what was indicated in the OSPF header LSA, LSR, LSU, and DDB are received from a peer which is not a neighbor peer LSA, LSR, and LSU are received from a neighbor with stats less than the loading state Simple authentication error MD5 error Checksum Error Version mismatch Area mismatch The received hello packet has a different hello or dead interval than the configuration Buffer allocation failure A sequence no errors occurred during the database exchange process Socket Read/Write operation error Packet(s) dropped due to queue overflow Received packet is not an OSPF packet 1058 | Open Shortest Path First (OSPFv2 and OSPFv3)