Dell Force10 S25-01-GE-24T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 98
power-off, Command Example: ping IPv4, linecard
View all Dell Force10 S25-01-GE-24T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
www.dell.com | support.dell.com Usage Information When you enter the ping command without specifying an IP/IPv6 address (Extended Ping), you are prompted for a target IP/IPv6 address, a repeat count, a datagram size (up to 1500 bytes), a timeout in seconds, and for Extended Commands. See Appendix , for information on the ICMP message codes that return from a ping command. Figure 5-8. Command Example: ping (IPv4) FTOS#ping 172.31.1.255 Type Ctrl-C to abort. Sending 5, 100-byte ICMP Echos to 172.31.1.255, timeout is 2 seconds: Reply to request 1 from 172.31.1.208 0 ms Reply to request 1 from 172.31.1.216 0 ms Reply to request 1 from 172.31.1.205 16 ms : : Reply to request 5 from 172.31.1.209 0 ms Reply to request 5 from 172.31.1.66 0 ms Reply to request 5 from 172.31.1.87 0 ms FTOS# Figure 5-9. Command Example: ping (IPv6) FTOS#ping 100::1 Type Ctrl-C to abort. Sending 5, 100-byte ICMP Echos to 100::1, timeout is 2 seconds: !!!!! Success rate is 100.0 percent (5/5), round-trip min/avg/max = 0/0/0 (ms) FTOS# power-off c e Turn off power to a selected line card or the standby (extra) Switch Fabric Module (SFM). Syntax power-off {linecard number | sfm sfm-slot-id} Parameters linecard number sfm sfm-slot-id Enter the keyword linecard and a number for the line card slot number. C-Series Range: 0 to 7 E-Series Range: 0 to 13 on a E1200/E1200i, 0 to 6 on a E600/E600i, and 0 to 5 on a E300. Enter the keyword sfm by the slot number of the SFM to which you want to turn off power. Note: This option is supported on E-Series only. Defaults Disabled Command Modes EXEC Privilege Command History Version 8.1.1.2 Introduced on E-Series ExaScale E600i Version 8.1.1.0 Introduced on E-Series ExaScale E1200i Version 7.5.1.0 Introduced on C-Series E-Series original Command 98 | Control and Monitoring