Dell Force10 S25-01-GE-24T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 1396
Command Example, show controllers tengigabitethernet Command Example
View all Dell Force10 S25-01-GE-24T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1396 highlights
www.dell.com | support.dell.com Command History Version 7.4.2.0 Added support for Ten Gigabit Ethernet Example Figure 55-2. show controllers sonet Command Example FTOS#show controllers sonet Interface is SONET 1/2 SECTION LOF = 0 LOS = 0 BIP(B1) = 0 LINE AIS = 0 RDI = 0 FEBE = 0 BIP(B2) = 0 PATH AIS = 0 RDI = 0 LOP = 0 FEBE = 0 BIP(B3) = 0 Active Defects: NONE Active Alarms: NONE Enabled Alarms are listed here (default is none) Alarm reporting enabled for: SLOS SLOF B1-TCA LAIS LRDI B2-TCA PAIS PRDI PLOP B3-TCA SD SF Framing is SDH, AIS-shut is enabled Scramble-ATM is enabled, Down-when-looped is enabled Loopback is disabled, Clock source is internal, Speed is Oc48 CRC is 32-bits, Flag C2 is 0x16, Flag J0 is 0xcc, Flag S1S0 is 0x2 FTOS# Example Figure 55-3. show controllers tengigabitethernet Command Example FTOS#show controllers te 4/1 Interface is TenGigabitEthernet 4/1 SECTION LOF = 0 LOS = 0 BIP(B1) = 13 LINE AIS = 0 RDI = 1 FEBE = 7633 BIP(B2) = 19264 PATH AIS = 0 RDI = 0 LOP = 0 FEBE = 8554 BIP(B3) = 15685 Active Defects: LRDI Active Alarms: LRDI Alarm reporting enabled for: SLOS SLOF B1-TCA LAIS LRDI B2-TCA PAIS PRDI PLOP B3-TCA SD SF Framing is SONET, AIS-shut is enabled Scramble-ATM is enabled, Down-when-looped is enabled Loopback is disabled, Clock source is line, Speed is Oc192 CRC is 32-bits, Flag C2 is 0x1a, Flag J0 is 0xcc, Flag S1S0 is 0x0 FTOS# Table 55-2. Lines in show controllers interface Command Example Line interface is... SECTION LOF Description Displays the interface type and the slot and port number information. Displays the section loss of frame (LOF) error. This error is detected when a severely error framing (SEF) defect on the incoming interface signal persist for 3 milliseconds 1396 | SONET