Dell Force10 S25-01-GE-24T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 190

www.dell.com | support.dell.com • If 802.1X authorization is enabled and all information from the RADIUS server is valid, the port is placed in the specified VLAN after authentication. • If port security is enabled on an 802.1X port with VLAN assignment, the port is placed in the RADIUS server assigned VLAN. • If 802.1X is disabled on the port, it is returned to the configured access VLAN. • When the port is in the force authorized, force unauthorized, or shutdown state, it is placed in the configured access VLAN. • If an 802.1X port is authenticated and put in the RADIUS server assigned VLAN, any change to the port access VLAN configuration will not take effect. • The 802.1X with VLAN assignment feature is not supported on trunk ports, dynamic ports, or with dynamic-access port assignment through a VLAN membership. debug dot1x c s Display 802.1X debugging information. Syntax debug dot1x [all | errors | packets | state-machine] [interface interface] Parameters all errors packets state-machine interface interface Enable all 802.1X debug messages. Display information about all 802.1X errors. Display information about all 802.1X packets. Display information about all 802.1X packets. Restricts the debugging information to an interface. Defaults Disabled Command Modes EXEC Privilege Command History Version 8.4.1.0 Introduced on C-Series and S-Series 190 | 802.1X