Dell Force10 S25-01-GE-24T FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 1366
snmp-server location, Configuring Informs
View all Dell Force10 S25-01-GE-24T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1366 highlights
www.dell.com | support.dell.com When multiple snmp-server host commands are given for the same host and type of notification (trap or inform), each succeeding command overwrites the previous command. Only the last snmp-server host command will be in effect. For example, if you enter an snmp-server host inform command for a host and then enter another snmp-server host inform command for the same host, the second command will replace the first. The snmp-server host command is used in conjunction with the snmp-server enable command. Use the snmp-server enable command to specify which SNMP notifications are sent globally. For a host to receive most notifications, at least one snmp-server enable command and the snmp-server host command for that host must be enabled. Note: For v1 / v2c trap configuration, if the community-string is not defined using the snmp-server community command prior to using this command, the default form of the snmp-server community command will automatically be configured, with the community-name the same as specified in the snmp-server host command. Related Commands Configuring Informs To send an inform, follow the step below. 1. Configure a remote engine ID. 2. Configure a remote user. 3. Configure a group for this user with access rights. 4. Enable traps. 5. Configure a host to receive informs. snmp-server enable traps snmp-server community Enable SNMP traps. Configure a new community SNMPv1 or SNMPv2c snmp-server location c e s Configure the location of the SNMP server. Syntax snmp-server location text To delete the SNMP location, enter no snmp-server location. Parameters text Enter an alpha-numeric text string, up to 55 characters long. Defaults Not configured. Command Modes CONFIGURATION Command History Version 7.6.1.0 Support added for S-Series Version 7.5.1.0 Support added for C-Series E-Series legacy command 1366 | SNMP and Syslog