Dell Latitude E6400 Service Manual - Page 71
Modular Drive
View all Dell Latitude E6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Back to Contents Page Modular Drive Dell™ Latitude™ E6400 and E6400 ATG and Mobile Workstation Precision™ M2400 Service Manual Removing the Modular Drive Replacing the Modular Drive The modular drive supports either a second hard drive, an optical drive, or a an air bay for travel. Removing the Modular Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. NOTE: The security screw on the modular drive is optional and may not be installed on your computer. 1. Follow the procedures in Before Working on Your Computer. 2. Turn your computer upside down. 3. If your computer has a security screw for the modular drive, remove the security screw. 4. Push the release latch in to release it. 5. Use the release latch to slide the drive out of the modular bay. 1 security screw 2 modular bay 3 modular drive 4 release latch Replacing the Modular Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. NOTE: The security screw on the modular drive is optional and may not be installed on your computer. 1. Slide the drive in the modular bay. 2. If your computer has a security screw for the modular drive, replace the security screw. 3. Follow the procedures in After Working on Your Computer. Back to Contents Page