Dell XPS 730 H2C Service Manual - Page 32
Replacing Memory Modules
View all Dell XPS 730 H2C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Back to Contents Page Replacing Memory Module(s) Dell™ XPS™ 730/730X Service Manual WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 1. Follow the procedures in Before You Begin. 2. Remove the computer cover (see Replacing the Computer Cover). 3. Locate the memory modules on the system board (see System Board Components). 4. Press out the securing clip at each end of the memory module connector. 1 securing clip 2 memory module connector 5. Grasp the module and pull it upwards. If the module is difficult to remove, gently ease the module back and forth to remove it from the connector. CAUTION: Do not install ECC memory modules. 6. Ensure that you install a single memory module in DIMM connector 0, the connector closest to the processor, before you install modules in any other connector. Dell™ XPS™ 730: A matched pair of modules in DIMM connectors 0 and 1 Dell XPS 730X: B matched pair of memory modules in DIMM connectors 2 and 3