Dell XPS 730 H2C Service Manual - Page 33
My Computer - desktop
View all Dell XPS 730 H2C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
7. Align the notch on the bottom of the module with the tab in the connector. 1 cutouts (2) 3 notch 2 memory module 4 tab CAUTION: To avoid damage to the memory module, press the module straight down into the connector while you apply equal force to each end of the module. 8. Insert the module into the connector until the module snaps into position. If you insert the module correctly, the securing clips snap into the cutouts at each end of the module. 9. Replace the computer cover (see Replacing the Computer Cover). 10. Connect your computer and devices to electrical outlets, and then turn them on. If the message appears stating that memory size has changed, press to continue. 11. Log on to your computer. 12. Right-click the My Computer icon on your Microsoft® Windows® desktop and click Properties. 13. Click the General tab. 14. To verify that the memory is installed correctly, check the amount of memory (RAM) listed. Back to Contents Page