EMC CX500I Configuration Guide - Page 124
Planning Your Hardware Components, Components for Storage Systems
View all EMC CX500I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Storage-System Hardware Planning Your Hardware Components This section helps you plan the hardware components - adapters, cables, and storage systems and site requirements - for each server in your installation. For shared switched storage or shared-or-clustered direct storage, you must use high-availability options: two SPs per storage system and at least two HBAs per server. For shared switched storage, two switch fabrics are required. For unshared direct storage, a server may have one or two HBAs. Components for Storage Systems Components for Shared Switched Storage The minimum hardware configuration required for shared switched storage is two servers, each with two host bus adapters, two Fibre Channel switch fabrics with one switch per fabric, and two SPs per storage system. Two SPS units (standby power supplies) are also required. You can use more servers (up to 15 are allowed), more switches per fabric, and more storage systems (up to four are allowed). Components for Shared-or-Clustered Direct Storage The minimum hardware required for shared-or-clustered direct storage is two servers, each with two host bus adapters, and one storage system with two SPs. You can use more storage systems (up to four are allowed). Components for Unshared Direct Storage The minimum hardware required for unshared direct storage is one server with two host bus adapters and one storage system with two SPs. You can choose more storage systems (up to four are allowed). 6-8 EMC CLARiiON CX300, CX500, CX500i, and CX700 Storage Systems Configuration Planning Guide