Epson BrightLink 1480Fi Users Guide - Page 169

4. Turn on the Edge Blending, Line Guide, and Pattern Guide settings. Note: If the projected guide is unclear, try changing the Guide Color setting. 5. Select the edge you want to blend on each projector and press Enter. You see a screen like this: 6. Select the Blending setting and select On. 7. Press Esc to return to the previous screen. 8. Select the Blend Start Position setting and adjust the point where edge blending begins. Note: If you created a unified image area using the Edge Blending feature, set the Blend Start Position setting to 0. 9. Select the Blend Range setting and use the arrow buttons to select the width of the blended area so that the displayed guides are at the edges of the overlapping area between the two images. Note: If you created a unified image area using the Edge Blending feature, set the Blend Range setting to 300. 169