Epson BrightLink 1480Fi Users Guide - Page 354
Solutions When You Cannot Operate a Computer from the Projected Screen
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 354 highlights
Solutions When You Cannot Operate a Computer from the Projected Screen If you are unable to access a computer from the projected screen, try the following solutions: • Make sure the USB Display setting in the Signal I/O menu is set to On. • Make sure you perform pen calibration when using the interactive pen for the first time so that the projector recognizes the position of the pen correctly. • Make sure PC Interactivity is turned on in the projector's interactive toolbar. • Make sure the USB cable is securely connected. Disconnect the USB cable, and then reconnect it. • When you are connecting your computer to the projector's USB-B2 port, make sure the USB-B2 setting in the Pen/Touch menu matches the HDMI input your computer is connected to. • When connecting your computer to either of the control pad's (BrightLink 1485Fi) HDMI ports, make sure to connect your computer to the USB-B port on the control pad and not directly to the projector. Parent topic: Solving Interactive Problems Solutions for Problems With Capturing, Printing, Saving, or Scanning If you are having trouble capturing and pasting, or printing, saving, or scanning, try the following solutions: • If you are having trouble pasting a captured image, make sure the image is not HDCP protected. • If a black frame appears around a pasted image, it may be because the image was shifted or resized. • Connect only one printer or multifunction device at a time, and make sure the device is supported by the projector. • If you are having trouble printing or scanning, make sure the printer is not out of ink, jammed, or in any other error state. • For USB printing or scanning, make sure the printer is connected to the USB-A port on the projector or control pad (BrightLink 1485Fi). If you are using the control pad, make sure a USB cable is connected between the projector's USB-A port and the upper USB-B port on the control pad. • For USB printing or scanning, try connecting a different USB cable, and make sure the cables are less than 16 feet (4.9 m) long. • Check the settings on the Interactive menu. Parent topic: Solving Interactive Problems Related references Interactive Settings - Interactive Menu 354