Epson BrightLink 1480Fi Users Guide - Page 195
Transferring Settings from a USB Flash Drive, Parent topic, pjconfdata.bin
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
5. Once the projector enters standby mode, remove the flash drive. Note: If the projector does not enter standby mode and the lights continue flashing, see the link below for a solution. Parent topic: Copying Menu Settings Between Projectors Transferring Settings from a USB Flash Drive After saving projector settings to a USB flash drive, you can transfer them to another projector of the same model. Note: Make sure the USB flash drive contains only a single settings transfer from another projector of the same model. The settings are contained in a file called pjconfdata.bin. If the drive contains other files, the transfer may not complete correctly. Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have to repeat your adjustments. 1. Turn off the projector and unplug the power cord from the projector's power inlet. 2. Insert the flash drive into one of the USB-A ports. Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be saved correctly. 3. Press and hold the Menu button on the control panel or remote control as you connect the power cord to the projector's power inlet. 4. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release the Menu button. 195