Epson BrightLink 1480Fi Users Guide - Page 260

4. To swap the projected image and whiteboard from left to right, select the center divider. You cannot perform the following operations during split screen projection: • E-Zoom • Switching aspect mode Parent topic: Using the Interactive Features at the bottom of the Sharing the Projected Screen Follow the instructions in these sections to share the projected screen with other compatible BrightLink projectors. The screen sharing function is limited by the following: • You cannot share images or content that are protected by HDCP. • You cannot change the projector's Network settings while screen sharing. • The Screen Type setting in the Installation menu must be set to 16:9, 16:10, or 4:3. Starting a Shared Screen Session Parent topic: Using the Interactive Features Starting a Shared Screen Session You can share the projector's screen with up to 4 compatible projectors on the same network. Users can interact with the shared screen from the connected projectors. To use the Screen Sharing feature, the distributing and receiving projectors must be connected to the same network and have the Screen Sharing setting enabled in the projector's Network menu. Other requirements include the following: • On the distributing projector: if you want to skip authentication of keywords for other projectors to speed up connection, set the Connection Mode setting to Keyword Off in the projector's Network menu. • On the receiving projectors: make sure that no computer is connecting to the projector using Epson iProjection software, and that the Screen Type setting in the projector's Installation menu matches that of the distributing projector. 1. Turn on the projector, if necessary. 2. Press the Home button on the remote control and select Screen Sharing on the Home screen. 3. Enter the IP address of the projector you want to share your screen with and select Connect. 260