Epson BrightLink 1480Fi Users Guide - Page 291

Event ID code 0434 0481 0482 0485 0483 04FE 0484 0479 04FF 0891 0892 0893 0894 0895 0898 0899 089A 089B 089C Cause and solution Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again. The network software quit unexpectedly. Check the network communication status, then turn the projector off and then on again. Communication with computer was disconnected. Restart the network software. A projector system error has occurred. Turn the projector off and then on again. Cannot find the SSID (network name). Make sure your computer and projector are connected to your access point's current SSID. The WPA/WPA2/WPA3 authentication type does not match. Make sure the wireless network security settings are correct. The WEP/TKIP/AES encryption type does not match. Make sure the wireless network security settings are correct. Communication with unauthorized access point was disconnected. Contact your network administrator. Communication with a connected device was disconnected. Check your device's connection status. Failed to acquire DHCP address. Make sure the DHCP server is operating correctly. If you are not using DHCP, turn off the DHCP setting in the Network menus. A communication error has occurred. Try restarting the network software and restarting your projector. If that does not solve the problem, contact Epson for help. The EAP authentication type does not match the network. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. EAP server authentication failed. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. EAP client authentication failed. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. 291