Epson BrightLink 1480Fi Users Guide - Page 193
Copying Menu Settings Between Projectors, Erase Memory, Reset Memory Settings, Parent topic, Caution
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
• Erase Memory: Erases the selected memory settings • Rename Memory: Renames a saved memory • Reset Memory Settings: Delete all saved memory 5. Press Esc to exit. Parent topic: Adjusting Projector Features Copying Menu Settings Between Projectors After you select menu settings for your projector, you can transfer them to another projector of the same model. Note: Copy the projector's settings before you adjust the projected image using the projector's Geometry Correction settings. Any saved User's Logo setting on the projector will transfer to the other projector. Caution: If the copy process fails due to a power failure, communication error, or for any other reason, Epson will not be responsible for any repair costs incurred. The following settings will not transfer between projectors: • Light Source Hours • Status The following settings will not transfer between projectors if you set the Batch Setup Range setting to Limited: • Password Protection settings • EDID in the Signal I/O menu • Network menu settings Note: In addition to the methods covered in this section, you can also copy and transfer settings to multiple projectors over a network using the Epson Projector Management software. See the online Epson Projector Management Operation Guide for instructions. You can download the latest software and documentation from the Epson website. Saving Settings to a USB Flash Drive Transferring Settings from a USB Flash Drive Saving Settings to a Computer Transferring Settings from a Computer 193