Epson BrightLink 1480Fi Users Guide - Page 347

• Check the IP address on the projector, then reenter the IP address in the browser search bar. Note: The user ID and password are case sensitive. Parent topic: Solving Network Problems Solutions When Network Alert E-Mails are Not Received If you do not receive an e-mail alerting you to problems with a projector over the network, try the following solutions: • Make sure the projector is turned on and connected to the network correctly. (If an error shut down the projector, it cannot send an e-mail.) • Make sure you set up the projector e-mail alert settings correctly on the projector's network Mail Notification menu or in the network software. • Set the Standby Mode setting to Communication On so the network software can monitor the projector in standby mode. Change the Port setting according to your network environment. Parent topic: Solving Network Problems Related references Network Projector E-mail Alert Messages Related tasks Setting Up Projector Network E-Mail Alerts Solutions When the Image Contains Static During Network Projection If the projected image contains static during network projection, try the following solutions: • Check for any obstacles between the access point, the computer, the mobile device, and the projector. If necessary, change their positions to improve communication. Also make sure that they are not too far apart; move them closer together and try to connect again. • If the wireless connection is slow or your projected image contains noise, check for interference from other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away or expand your wireless bandwidth. • If the connection speed declines, reduce the number of connected devices. Parent topic: Solving Network Problems 347