Epson BrightLink 1480Fi Users Guide - Page 38
Projection Distance, Vertical Installation, Fixed Installation, Projection, Parent topic
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Rear projection from a table or portable cart behind a translucent screen (interactive features not supported) Wherever you set up the projector, make sure to position it squarely in front of the screen, not at an angle. If you place the projector vertically, turn on the Vertical Installation setting in the projector's Installation menu. If you install the projector to a fixed location, turn on the Fixed Installation setting in the projector's Installation menu. If you project from a table or portable cart, be sure to select the correct Projection option in the projector's menu system. Note: You cannot use the interactive pens or finger touch when projecting from behind a screen or under a table. Parent topic: Projector Placement Projection Distance The distance at which you place the projector from the screen determines the approximate size of the image. The image size increases the farther the projector is from the screen, but can vary depending on the zoom factor, aspect ratio, and other settings. Refer to the tables in the online Installation Guide to determine approximately how far to place the projector from the screen based on the size of the projected image. (Conversion figures may have been rounded up or down.) You can also use the Projection Distance Calculator here (U.S.), here (Canada), or here (Caribbean). 38