Epson BrightLink 1480Fi Users Guide - Page 224
Using Finger Touch Operations, Parent topic, Related concepts, Related references
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
8. If the cursor location and your finger position do not match, repeat these steps to calibrate again. Parent topic: Using Finger Touch Interactivity Related concepts Pen Calibration Related references Pen and Touch Setup Settings - Pen/Touch Menu Installation Settings - Installation Menu Using Finger Touch Operations You can use your finger to interact with the projected screen, just as you would use an interactive pen. You can use either a pen or your finger, or use both at the same time. When performing touch operations with your finger, you can use up to six fingers (depending on the interactive mode, operating system, and connection type). Note: A Touch Unit is optional for the BrightLink 1480Fi and must be installed for finger touch operation. 1. Install the Touch Unit as described in the online Installation Guide. Note: If you are using an older Touch Unit, refer to the installation guide for that model. 2. Turn on your projector. This automatically turns on the Touch Unit also. The blue light on the Touch Unit turns on. Note: If the blue light does not turn on, press the Menu button on the remote control and make sure the Installation > Touch Unit > Power setting is set to On. 3. Calibrate the pens. 224