Epson BrightLink 1480Fi Users Guide - Page 340
Solutions When the Image is Fuzzy or Blurry
View all Epson BrightLink 1480Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 340 highlights
Solutions When the Image is Fuzzy or Blurry If the projected image is fuzzy or blurry, try the following solutions: • Adjust the image focus. • Clean the projector lens. • Position the projector close enough to the screen, and directly in front of it. • Verify that the throw distance from the projector to your projection surface meets the specifications in your projector's online Installation Guide. • Position the projector so the keystone adjustment angle is not so wide that it distorts the image. • Adjust the Sharpness setting to improve image quality. • If you are projecting from a computer using a VGA cable, press the Auto button on the remote control to automatically adjust the tracking and sync. If any bands or overall blurriness remain, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings. • If you are projecting from a computer, use a lower resolution or adjust the computer's resolution to match the projector's native resolution, if possible. Parent topic: Solving Image or Sound Problems Related references Image Quality Settings - Image Menu Related tasks Focusing the Image Cleaning the Lens Solutions When the Image Brightness or Colors are Incorrect If the projected image is too dark or light, or the colors are incorrect, try the following solutions: • Press the Color Mode button on the remote control to try different color modes for the image and environment. • Check your video source settings. • Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, White Balance, Color Saturation and RGBCMY. • Make sure you selected the correct Signal Format or EDID setting in the Signal I/O menu, if available for your video source. 340