Epson BrightLink 1480Fi Users Guide - Page 91

13. If you are using the PJLink protocol for projector control, turn on the PJLink setting in the Projector Control menu and enter the IP address where you want to receive PJLink notifications as the Notified IP Address setting. 14. When you finish selecting settings, select Return and press Enter to return to the Network Settings menu. 15. Select Set, and follow the on-screen instructions to save your settings and exit the menus. Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert. Network Projector E-mail Alert Messages Parent topic: Using the Projector on a Network Network Projector E-mail Alert Messages When a problem occurs with a networked projector, and you selected to receive e-mail alerts, you receive an e-mail containing the following information: • The email address entered as the From setting • Epson Projector on the subject line • The name of the projector experiencing a problem • The IP address of the affected projector • Detailed information about the problem Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert. Parent topic: Setting Up Projector Network E-Mail Alerts Setting Up Monitoring Using SNMP Network administrators can install SNMP (Simple Network Management Protocol) software on network computers so they can monitor projectors. If your network uses this software, you can set up the projector for SNMP monitoring. 1. Press the Menu button. 2. Select Network > Network Settings > Projector Control > SNMP > On. 91