Epson LQ-2500 User Manual - Page 35
>cg Table, >half Speed
View all Epson LQ-2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
These current settings can be printed out with the *Print Out Settings mode, described later in this chapter. A sample printout appears below. Current setting >QUALITY Draft >FONT Draft >PITCH 10CPI >CONDENSED Off >FORM LENGTH 11.0" >1" SKIP Off >LEFT MARGIN 0 >RIGHT MARGIN 136 >CG TABLE Italic >COUNTRY USA >PRINT DIR. Bi-D >HALF SPEED Off >SHEET FEEDER Off >DEFAULT BIN *1 Whenever you load a macro, the new macro settings become the current settings (although the macro remains stored in memory). You then have the option of: l Changing only the current printer settings, or l Changing the current settings and saving them as a macro. Changing only the current settings is useful when you want different settings for only one print job, but you don't want to permanently change a macro. For example, you may have one macro set for business correspondence in Letter Quality with the Courier font. If you wanted to write a letter to a friend, you could use that same macro, change to the more informal Sans Serif font, but not save the setting. This would preserve the original macro. On the other hand, you might change the current settings, then find you like the new settings more than the original macro settings. You could save the new settings as a macro, replacing the original settings. If you change only the current settings, the new settings remain in effect until you change them again, or until you turn the printer off. When you turn the printer off, the original macro remains stored in memory, but any changes are lost. If you want to save the new settings, you must save them as a macro. SelecType 2-9