Epson LQ-2500 User Manual - Page 39
*Change Defaults, defaults
View all Epson LQ-2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
*CHANGE DEFAULTS The defaults are the settings in effect when you turn the printer on. Table 2-2 shows the default settings and options for the LQ-2500. If there are any terms you don't understand, consult the Glossary at the back of this manual. Table 2-2. Default Settings and Options Select with Setting Change with Option INTERFACE Parallel, Serial *BAUD RATE 300BPS. 600BPS. 1200BPS. 2400BPS. 4800BPS. 9600BPS. 19200BPS l PARITY None. Even. Odd. Ignore AUTO LINE FEED On. Off SLCT-IN VaIid. Invalid DEFAULT MACRO #1, #2, #3, #4 *These settings. and their options. are displayed only when the Serial Interface setting IS selected. The preset defaults When you receive your LQ-2500, the defaults are already set for a parallel interface. The *Print Out Settings mode lists the default settings, as shown below. Default setting >INTERFACE Parallel >BAUD RATE *9600BPS >PARITY * None >AUTO LINE FEED Off >SLCT-IN Valid >DEFAULT MACRO #l Note If you change the default settings, the printer does not recognize the new settings until you turn the power OFF then turn it back ON again. SelecType 2-13