Epson WorkForce GT-1500 User Manual - Page 129
Automatic Document Feeder Problems, You Cannot Scan Using the ADF
View all Epson WorkForce GT-1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Home > Solving Problems Automatic Document Feeder Problems You Cannot Scan Using the ADF Paper Jams in the Automatic Document Feeder You Cannot Scan Using the ADF Make sure you have selected either Office Mode or Professional Mode in Epson Scan. See Changing the Scan Mode for instructions. Make sure Auto Detect (Office Mode only) or ADF is selected as the Document Source setting in Epson Scan. See Scanning in Office Mode Using the ADF or Scanning in Professional Mode Using the ADF for instructions. Do not feed photographs, valuable original artwork, or documents printed on thick media into the ADF as it may cause a jam, damage the ADF feed mechanism, or damage the original. If the ADF is open, close it and try scanning again. Top Paper Jams in the Automatic Document Feeder If paper jams inside the ADF, open the ADF and remove any paper from the document table. Then look to see if paper is extending from either end of the feeder. Do not feed photographs, valuable original artwork, or documents printed on thick media into the ADF as it may cause a jam, damage the ADF feed mechanism, or damage the original. If paper is still jammed, follow these steps. Turn off the scanner. If the ADF is open, close it. Open the top cover of the ADF.