Garmin GTR 200 GTR 200 Installation Manual - Page 15
Display, COM Specifications, Table 1-4, Display Specifications, COM Transmitter Specifications - 8 33
View all Garmin GTR 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
1.3.3 Display The display on the GTR is a sunlight readable LCD display. Table 1-4 Display Specifications Characteristics Display Size Active Area Resolution Viewing Angle Specifications Width: 3.46" (88.0mm) Height: 0.843" (21.4mm) Width: 2.95" (74.98mm) Height: 0.486" (12.36mm) 200 x 33 pixels Left: 45 Right: 45° Up: 10 Down: 30 1.3.4 COM Specifications The GTR 200 transmitter meets the requirements of RTCA DO-186B section 2.3 for a class 4 transmitter. Table 1-5 COM Transmitter Specifications Characteristics Microphone Input Modulation Capability Modulation Frequency Range Frequency Tolerance Output Power Duty Cycle Carrier Noise Level Stuck Mic Time-Out Demodulated Audio Distortion Specifications Two inputs, standard carbon or dynamic mic with integrated preamp. The GTR 200 provides a 150 Ω AC input impedance and supplies the microphone with an 11 V bias through 470 Ω +/- 5%. 85% with 150 to 1500 mVRMS microphone input at 1000 Hz. Range can be extended from 20 mVrms to 2500 mVrms with mic gain adjustment. AM Double sided Emission Designator: 6K00A3E (118 - 136.975 MHz) 118.000 to 136.975 MHz, 25 kHz channel spacing +/-5 ppm from -20°C to +55°C 10 Watts carrier minimum 20% At least 35 dB (SNR). 35 seconds time-out, reverts to receive Less than 25% distortion when the transmitter is at 85% modulation at 350 to 2500 Hz 190-01553-00 Rev. A GTR 200 Installation Manual Page 1-3