Garmin GTR 200 GTR 200 Installation Manual - Page 48
Headset Audio, 4.7 Music Inputs, 4.8 Receiver Audio, GTR 200 Installation Manual, Rev.
View all Garmin GTR 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4.6 Headset Audio Headset audio outputs PILOT HS RIGHT PILOT HS LEFT PILOT HS LO COPILOT HS RIGHT COPILOT HS LEFT COPILOT HS LO Pin Name Pin I/O 13 Out 14 Out 33 -- 11 Out 12 Out 30 -- 4.7 Music Inputs The music inputs are noise rejecting and have a nominal input impedance of 600 Ω. The max. rated input level is 1.5 Vrms. The MUSIC LO must be connected to the music source along with MUSIC RIGHT and MUSIC LEFT. If MUSIC LO is not connected, music volume will be low (or inaudible), noisy, and distorted. MUSIC IN RIGHT MUSIC IN LEFT MUSIC LO Pin Name Pin I/O 18 In 19 In 37 -- 4.8 Receiver Audio RECEIVER AUDIO OUT is a 40 mW audio output that is intended to drive a recording device or an audio panel. RECEIVER AUDIO OUT supplies 40 mW (4.9 Vrms) into a 600 load, and is generally connected to the audio panel (if used). This output can also drive a recording device. When driving a recording device the output level will typically need to be reduced. The output level is controlled through configuration mode. RECEIVER AUDIO OUT is the summation of the receiver audio, COM sidetone audio, intercom audio, and AUX audio. RECEIVER AUDIO OUT HI RECEIVER AUDIO LO Pin Name Pin I/O 10 Out 29 -- GTR 200 Installation Manual Page 4-4 190-01553-00 Rev. A