Garmin GTR 200 GTR 200 Installation Manual - Page 53
A.2 Shield Termination Technique – Method A.1 (Standard), A-2
View all Garmin GTR 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
A.2 Shield Termination Technique - Method A.1 (Standard) NOTE For the following steps please refer to the drawings showing the installation of a Shield Block Backshell. 1. The appropriate number of Shield Block Backshells will be included in the particular LRU connector kit. Figure A-2 Method A.1 for Shield Termination Table A-2 Shielded Cable Preparations for Garmin Connectors Backhell Size 1 2 3 4 5 Number of Pins Std/ HD Float Min (inches) Float Max (inches) 9/15 1.25 2.25 15/26 1.5 2.5 25/44 1.5 2.5 37/62 1.5 2.5 50/78 1.5 2.5 Ideal Float (inches) 1.75 2.0 2.0 2.0 2.0 Window Min (inches) 2.75 3.0 3.0 3.0 3.0 Window Max (inches) 5.25 5.5 5.5 5.5 5.5 Ideal Window (inches) 4.25 4.5 4.5 4.5 4.5 2. At one end of a shielded cable (item 2) measure a distance between "Window Min" to "Window Max" (Table A-2) and cut a window (max size 0.35") in the jacket to expose the shield (Figure A-2). Use caution when cutting the jacket to avoid damaging the individual braids of the shield. When dealing with a densely populated connector with many cables, it may prove beneficial to stagger the windows throughout the "Window Min" to "Window Max" range. If staggering is not needed the "Ideal Window" length is recommended. Suggested tools to accomplish the window cut: • Coaxial Cable Stripper • Thermal Stripper • Sharp Razor Blade 190-01553-00 Rev. A GTR 200 Installation Manual Page A-3