Garmin GTR 200 GTR 200 Installation Manual - Page 46
Power, 4.3 Lighting Bus, Table 4-1, J2001 Connector
View all Garmin GTR 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Table 4-1 J2001 Connector Pin Pin Name I/O 29 RECEIVER AUDIO LO -- 30 COPILOT HS LO -- 31 AUX 1 LO -- 32 AUX MONO IN 1 In 33 PILOT HS LO -- 34 COPILOT MIC LO -- 35 PILOT PTT* In 36 PILOT MIC LO -- 37 MUSIC LO In *Indicates Active Low 4.2 Power Pins 1 & 20 supply power to the GTR 200. Refer to drawings in Appendix D for power and ground wire gauges. Pin Name Pin I/O AIRCRAFT POWER 1 In AIRCRAFT GROUND 20 -- 4.3 Lighting Bus The lighting bus is configurable for either 14 or 28 Vdc input. CAUTION Connecting the lighting bus to an incorrect pin can cause damage to the unit that will require return to the factory for repair. Make sure that the lighting bus is connected to the correct pin and does not short to any adjacent pins prior to applying power to the unit. LIGHTING BUS IN Pin Name Pin I/O 3 In GTR 200 Installation Manual Page 4-2 190-01553-00 Rev. A