Garmin GTR 200 GTR 200 Installation Manual - Page 64
B.1.2, Set Standby Frequency, Remote Ident Input, Message Format, Example Message
View all Garmin GTR 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
B.1.2 Set Standby Frequency Message Format $PMRRC01mka 01 .......message id mk ......standby frequency: m = desired frequency in MHz in hexadecimal, where m = desired frequency 30h , with desired frequency in range of 118 to 136 MHz, or 162 MHz. k = desired frequency in kHz where k = (desired frequency / 25 kHz) + 30h, with desired frequency in range of 000 to 975 kHz in 25 kHz steps, or 0 to 39. a..........transceiver function: N = normal receive operation M = enable monitor function 0 = no change Example Message $PMRRC01LFM40 Set the standby frequency to 124.550 MHz, monitor function selected B.1.3 Remote Ident Input This message is used to input a new ident, and reset the remote frequency input pointer. Message Format $PMRRC04tiiii 04 .......message id t ..........list type, input 1 iiii.......ident, four character ascii Example Message $PMRRC041SLE99 Set the remote frequency ident to "SLE." GTR 200 Installation Manual Page B-2 190-01553-00 Rev. A