Garmin GTR 200 GTR 200 Installation Manual - Page 66
B.2 RS-232 Outputs, B.2.1, Transceiver Status, Software Version
View all Garmin GTR 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
B.2 RS-232 Outputs B.2.1 Transceiver Status This message is used to output the current transceiver frequencies and status. Message Format $PMRRC01mkmkas 01....... message id mk...... active frequency (first mk): m = frequency in MHz in hexadecimal, where m = frequency - 30h , with frequency in range of 118 to 136 MHz, or 162 MHz. k = frequency in kHz where k = (frequency / 25 kHz) + 30h, with frequency in range of 000 to 975 kHz in 25 kHz steps, or 0 to 39. mk...... standby frequency (second mk): m = frequency in MHz in hexadecimal, where m = frequency - 30h , with frequency in range of 118 to 136 MHz, or 162 MHz. k = frequency in kHz where k = (frequency / 25 kHz) + 30h, with frequency in range of 000 to 975 kHz in 25 kHz steps, or 0 to 39. a......... transceiver status: R = normal receive M = monitor selected T = transmit enabled S = stuck mic s..........squelch test setting: 0 = automatic 1 = test selected Example Message $PMRRC01G4LFR0F0 The active frequency is 119.100 MHz, the standby frequency is 124.550 MHz, normal receive function, automatic squelch selected. This message is output once/second. B.2.2 Software Version This message is used to output the com software version. Message Format $PMRRC03vvvv 03 .......message id vvvv ...software version Example Message $PMRRC03010024 The software version is 01.00. This message is output once at power up and by request. GTR 200 Installation Manual Page B-4 190-01553-00 Rev. A