HP 1606 HP B-series Fabric OS 6.4.1b Release Notes (5697-0886, March 2011-incl - Page 16
HP StorageWorks Merging Fabrics Based on M-series and B-series Fibre Channel Switches
View all HP 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Table 1 Supported Fabric OS versions (continued) Model HP StorageWorks 8/8 SAN Switch HP StorageWorks 8/24 SAN Switch HP StorageWorks 8/40 SAN Switch HP StorageWorks 8/80 SAN Switch Earliest compatible nl version 6.2.1b Recommended version 6.4.1b5 HP StorageWorks Encryption SAN Switch 6.2.1b HP StorageWorks 1606 Extension SAN Switch (Brocade 7800) HP StorageWorks 2408 FCoE Converged Network Switch (Brocade 8000) HP StorageWorks DC SAN Director Switch 10/24 FCoE Blade (Brocade FCOE10-24) 6.3.0 6.3.0 6.3.0 HP StorageWorks DC SAN Director Multiprotocol Extension Blade (Brocade FX8-24) 6.3.0 HP StorageWorks DC Switch Encryption FC Blade Mi10k HP StorageWorks Director 2/140 & 2/64 HP StorageWorks Edge Switch 2/32, 2/12 & 2/24 M4400, M4700 (McDATA Fabric Mode and Open Fabric Mode)2, 4 6.2.1b M-EOS 9.9.53 Fabric Manager9 N/A Data Center Fabric Manager 10.1.4 6.4.1b 6.4.1b 6.4.1b 6.4.1b 6.4.1b 6.4.1b M-EOS 9.9.8 or later3 N/A 10.4.5 Table notes: 1 All zoning and fabric operations in a fabric with products running older versions of Fabric OS should be performed using interfaces to products running the latest version of Fabric OS. This is important for Brocade 3xxx series switches that do not support zoning configuration for newer products. 2 Other M-EOS models can participate in a fabric with Fabric OS 6.4, but cannot be directly attached via an E_Port to any products running Fabric OS 6.4. For information about HP support of interoperable fabrics, see HP StorageWorks Merging Fabrics Based on M-series and B-series Fibre Channel Switches Application Notes, available at http://www.hp.com. 3 HP strongly recommends that M-EOS products operate with the most recent version of M-EOS that supports interoperability. M-EOS 9.9.5 is the minimum version that is supported for interoperability with Fabric OS 6.3. For information about HP support of interoperable fabrics, see HP StorageWorks Merging Fabrics Based on M-series and B-series Fibre Channel Switches Application Notes, available at http://www.hp.com. 4 When routing to an M-EOS edge fabric using frame redirection, the fabric must have a Fabric OS-based product in order to configure the frame redirection zone information. 5 When directly attached to a host or target that is part of an encryption flow. 6 Products operating with Fabric OS versions earlier than 5.3.1b or 6.1.0e cannot participate in a logical fabric that is using XISLs (in the base fabric). 7 These platforms cannot be directly attached to hosts or targets for encryption flows. 8 SANRouters 1620 and 2640 should not be used with XPath or Fabric OS-based routing (FCR) for connections to the same edge fabric. 16