HP 1606 HP B-series Fabric OS 6.4.1b Release Notes (5697-0886, March 2011-incl - Page 58

Table 9 Fabric OS 6.4.0 closed defects (continued) Closed defect summary Solution Failed: Cannot start a transaction error message is displayed Fixed in Fabric OS 6.4.0 when trying to delete the policies in open transaction. Fabric binding does not work in 239 domain mode in Interopmode 3 with Fixed in Fabric OS 6.4.0 FCR on 8Gb switches. EX_Port rejects it. 2408 FCoE switch floods FCP traffic on two ports to CNAs, and sends FCP Fixed in Fabric OS 6.4.0 traffic to the wrong CNA. Fabric OS diagnostics and POST do not illuminate any of the GEx ports during initialization, making it difficult to determine visually if there is any issue with the LEDs for these ports. Fixed in Fabric OS 6.4.0 Workaround prior to upgrade: A diagnosing command is provided to test GEx LEDs. On activating/deleting Ipfilter policy, CAL.XML error message may be given Fixed in Fabric OS 6.4.0 in Web Tools. Need to block user from manual failback to EE when switch is disabled. Fixed in Fabric OS 6.4.0 F_Port mode Top Talker monitor and EE monitor may not show the counters Fixed in Fabric OS 6.4.0 reliably after the fid change. Customer upgrades from Fabric OS 5.3.1a to 6.0.0 to 6.1.1d causes the "bufsize" value for their custom setting in fabric watch to be changed. Fixed in Fabric OS 6.4.0 The port mirroring resource not available error must be clarified on Fixed in Fabric OS 6.4.0 the CLI interface for the user. BMD core file was generated during the overnight HA reboot test on 1606 Fixed in Fabric OS 6.4.0 extension SAN switch with FCIP and regular traffic. BMD crashed and core filed generated. EM computes total power usage using FRU headers instead of an internal Fixed in Fabric OS 6.4.0 power table. This causes multiple AP blades such as multiprotocol extension blade and 10/24 FCoE blade in a DC04 SAN director chassis to not power up when supplied with 120 VAC power. Fabric Merge/Segmentation indication - 0xfe is not triggered when E_Port Fixed in Fabric OS 6.4.0 enabled/disabled in interopmode 2 for Brocade SMIA project. After configdefault on a standalone 8/24 SAN Switch (also seen on Fixed in Fabric OS 6.4.0 8/80, 4/32B and 4/256), unable to upload/restore its configfile in Workaround prior to upgrade: IM2, post message 'Failed to clear defzone mode' rc -1, err After configdefault is issued, enable 0, msg. the switch, then disable the switch and issue configdown. This will complete the process successfully. Web Tools zone admin page may not automatically refresh, when a zoning Fixed in Fabric OS 6.4.0 configuration is enabled from McDATA switch. In Web Tools CEE tab configuration changes are not logged in the log window. Fixed in Fabric OS 6.4.0 Configdownload is successful with invalid SNMP v1/v3 trap recipients. Fixed in Fabric OS 6.4.0 In a large fabric with 50+ switches, observed errors: queue ns: queue Fixed in Fabric OS 6.4.0 full (miss=1) when enabling the config file cfgenable. In 1606 extension SAN switch, licenseremove command gets executed Fixed in Fabric OS 6.4.0 for slot based license, which configured to blade slot. supportsave failed error message for nonexistent blade may be seen on Fixed in Fabric OS 6.4.0 DC SAN Backbone director after multiprotocol router blade is hot swapped with multiprotocol extension blade. Switch responds with advertisement to solicitation with SP bit on. Fixed in Fabric OS 6.4.0 58