HP 1606 HP B-series Fabric OS 6.4.1b Release Notes (5697-0886, March 2011-incl - Page 48

Table 9 Fabric OS 6.4.0 closed defects (continued) Closed defect summary Solution After a non-disruptive firmware upgrade, when a port on an HP StorageWorks Fixed in Fabric OS 6.4.0 1606 SAN Extension Switch is changed from EX_Port to NPIV, NPIV devices cannot log in to the switch. In a FICON environment, FMS cache on standby CTP can become corrupted. Fixed in Fabric OS 6.4.0 Host in-band operations that include portname updates may fail. Portnames in the active and/or IPL configuration may contain unexpected data. 8/24 SAN switch in AG mode detected termination of process agd0:1784. Fixed in Fabric OS 6.4.0 In a FICON environment, IO/Ops is not displaying E_Ports on MVS Console. Fixed in Fabric OS 6.4.0 Incorrect data presented to mainframe operator console. Brocade_Switch SMI CAL call returns error message due to not receiving all Fixed in Fabric OS 6.4.0 properties from the switch when gateway is not configured. In a FICON environment, IPL file save from Web Tools fails - File content Fixed in Fabric OS 6.4.0 invalid error. Attempt to save IPL file from the WT CUP Port Connectivity, File Directory edit window, fails. The save button is enabled only when ASM mode is off, which is correct. But an error is being returned on the file save attempt - File content is invalid. Cannot save PDCM configuration file.. Operation and Network Maintenance Daemon (ONMD) crashed when links Fixed in Fabric OS 6.4.0 were coming up, as a result of saving the configuration with LLDP disabled on HP StorageWorks 2408 FCoE switch or 10/24 FCoE blade. ficud terminated - -- FICUD - CONFIGURATION S4 TIMEOUT Fixed in Fabric OS 6.4.0 DETECTED . CUP unresponsive to FICON host. Timeout IFCCs incurred on host systems. Active CTP termination and failover. FICON emulation does not handle the abort sequence correctly, which causes Fixed in Fabric OS 6.4.0 DSO FICON CRC errors during XRC RRS processing. Eventually, the session Workaround prior to upgrade: that encountered the error becomes suspended. Disable FICON XRC Emulation. In a FICON environment, Fabric OS does not generate RLIR to any LIRR Fixed in Fabric OS 6.4.0 registrant after receiving DRLIR from EOS switches. RLIRs for incidents originating on attached EOS switches are not reported to FICON host systems via registered host channel paths attached to Fabric OS platforms After 8Gb blade fault with HP StorageWorks 4/256 SAN Director, DC SAN Fixed in Fabric OS 6.4.0 Director or DC04 SAN Director, port was taken offline at asic level, but offline SCN (State Change Notification) was not sent to routing module, fspfd, fabricd, which created an inconsistent view between application and kernel on the port state of the faulted blade. Leads to Switch not ready for F or L port message with replacement blade. In FICON environment, Fabric OS is not generating RLIRs for link incidents Fixed in Fabric OS 6.4.0 on cascaded Fabric OS switches in IM0. Internal buffer corruption in zoned during zone merge process causes zone Fixed in Fabric OS 6.4.0 merge failure and switch panic. No cascaded FICON CUP connectivity on 4/256 director with 8Gb blade Fixed in Fabric OS 6.4.0 when E_Port and F_Port are on different ASICs on the blade. Switch panic occurs when management application performs repeat FCP Fixed in Fabric OS 6.4.0 LUN emulation queries. If the device gives an inappropriate response, or no response, to an FCP LUN request, FCP Daemon retries the query and the thread becomes stuck. Any new FCP LUN request that is issued from the management application generates a new thread. Eventually, FCP Daemon generates up to the maximum number of allowed threads, leading to the switch panic. Licenses removed during firmware downgrade from Fabric OS 6.3.0b to 6.2.0e. Fixed in Fabric OS 6.4.0 48