HP 1x1x16 IP Console Switch User Guide - Page 34
Serial Interface Adapter Pinouts, Attaching the Power Supply to the Rack Using Velcro
View all HP 1x1x16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
34 HP IP Console Switch User Guide 8. When finished, press the Enter key to return to the Terminal screen. Serial Interface Adapter Pinouts The serial interface adapter is a DCE device. The following table lists the pinouts for the serial interface adapter. DB9F Pin 1 2 3 4 5 6 7 8 9 Serial Interface Adapter Description Data Terminal Ready (DTR) Pins 6 and 1 are tied common internal to the serial interface idapter. Transmit Data (TXD) Receive Data (RXD) Data Set Ready (DSR) Signal Ground (GND) Data Terminal Ready (DTR) Clear to Send (CTS) Request to Send (RTS) Not Connected (N/C) Attaching the Power Supply to the Rack Using Velcro 1. Determine the location for the power supply. 2. Remove the protective strip from one side of the Velcro and attach that side to the power supply.