HP 1x1x16 IP Console Switch User Guide - Page 42
Update the main HP IP Console Switch firmware refer to the HP IP Console
View all HP 1x1x16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
42 HP IP Console Switch User Guide 12. Power off the cascaded HP KVM Server Console Switch. 13. Power off the monitor. 14. Disconnect the local KVM cables from the cascaded HP KVM Server Console Switch. 15. Connect the local port KVM cable to main HP IP Console Switch. 16. Connect a UTP CAT5 cable to the server connection port ("Components" on page 7) on the main HP IP Console Switch. 17. Connect the other end of that same UTP CAT5 cable to the RJ-45 interface port ("Components" on page 7) on the cascaded HP KVM Server Console Switch. 18. Repeat steps 15 and 16 for any other console switches to be added to this system. 19. Power on the console switches. 20. Power on the monitor. 21. Update the main HP IP Console Switch firmware (refer to the HP IP Console Switch documentation). 22. Update all Interface Adapter firmware. The following figure shows an HP IP Console Switch cascaded to an HP KVM Server Console Switch. The top console switch is the main console switch, while the bottom console switch is the cascaded console switch.