HP 1x1x16 IP Console Switch User Guide - Page 59
Activating the Broadcast Dialog Box, Setting Up a Scan Pattern, Accessing the Scan Dialog Box
View all HP 1x1x16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Local Port Operation 59 Activating the Broadcast Dialog Box To activate or deactivate broadcasting, from the Commands dialog box ("Accessing the Commands Dialog Box" on page 75), select or deselect Broadcast Enable. Setting Up a Scan Pattern In Scan mode ("Activating Scan Mode" on page 61), the HP IP Console Switch automatically scans port to port (server to server).You can select up to 16 servers from a list of all servers attached to the HP IP Console Switch. You can display the list by either server name or EID number by clicking the appropriate button. Selecting the checkbox beside each server to be added to the scan list creates the scan list. The creation of a scan list does not start Scan mode. You must enable Scan mode through the Scan Enable checkbox on the Commands dialog box ("Accessing the Commands Dialog Box" on page 75). Accessing the Scan Dialog Box From the Main dialog box ("Accessing the Main Dialog Box" on page 45), click Setup>Scan. The Scan dialog box is displayed.