HP 1x1x16 IP Console Switch User Guide - Page 64
Exiting Screen Saver Mode, Deactivating the Screen Saver
View all HP 1x1x16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
64 HP IP Console Switch User Guide Exiting Screen Saver Mode To exit the Screen Saver mode, press any key or move the mouse. The Main dialog box ("Accessing the Main Dialog Box" on page 45) is displayed. Deactivating the Screen Saver 1. From the Security dialog box ("Accessing the Security Dialog Box" on page 62), deselect Enable Screen Saver. 2. Click OK to save settings. To immediately activate the screen saver, press the Print Scrn key, and then press the Pause key. This command only works when the user is connected to a server. Activating Screen Saver Mode without Password Protection 1. If your HP IP Console Switch does not require a password to gain access to the Security dialog box ("Accessing the Security Dialog Box" on page 62), proceed to step 2. -orIf your HP IP Console Switch is password protected, refer to Deactivating the Screen Saver (on page 64), then go to step 2. 2. Select Enable Screen Saver. 3. Enter the number of minutes for Inactivity Time (1 to 99) to delay activation of the screen saver. 4. Select Energy if your monitor is Energy Star® compliant. Otherwise, select Screen. 5. (Optional) Click Test to activate the screen saver test, which lasts 10 seconds, then returns you to the Security dialog box. 6. Click OK to save settings. CAUTION: Monitor damage can result from the use of energy mode with monitors not compliant with Energy Star®. NOTE: No server is selected after the activation of the screen saver mode disconnects the user from a server. The status flag displays Free.