HP 1x1x16 IP Console Switch User Guide - Page 60
Adding Servers to the Scan List, Clear
View all HP 1x1x16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
60 HP IP Console Switch User Guide Adding Servers to the Scan List 1. From the Scan dialog box ("Activating Scan Mode" on page 61), select the checkbox beside each server to be added to the scan list. -orDouble-click a server name or port. -or- Press the Alt key plus the number of the server you want to scan. You can select up to 16 servers. 2. In the Scan Time box, enter the number of seconds (from 3 to 99) before the scan moves to the next server in the sequence. 3. Click OK to save settings. -or- Click Clear to remove all servers from the scan list. IMPORTANT: Selecting the checkbox beside each server to be added to the scan list creates the scan list. The creation of a scan list does not start the Scan mode. You must enable Scan mode through the Scan Enable checkbox on the Commands dialog box. NOTE: Servers will be scanned in the order they are selected. If you remove a server from the Device Modify dialog box later, the change can affect a custom scan pattern. Removing Servers from the Scan List 1. From the Scan dialog box ("Activating Scan Mode" on page 61), click the server to be removed. -orDouble-click a server name or port. -or- Click Clear to remove all servers from the scan list. 2. Click OK to save settings.